Kneeboard.live
Directory
Featured Aircraft:
OH-58D Kiowa Warrior
F-4E Phantom II
Login
Register
Discord
Donate
DCS: JF-17 Thunder
Startup Checklist
created by
fivedollarcrayons
Startup Checklist
POWER & MFDs
Battery Switch
ON
AC Gen Switch
ON
DC Gen Switch
ON
CMBT AAP Button
PRESS
If WMD-7 TGP installed:
CLDP AAP Button
PRESS
If KG-600 ECM pod installed:
SPJ AAP Button
PRESS
ECS Mode Knob Selector
NORM
HUD Brightness
AS DESIRED
UFCP Brightness
AS DESIRED
Ground Crew > Configuration Panel
Pylon Laser Codes
AS DESIRED
DMAP Type
AS DESIRED
Air Space Source
AS DESIRED
Update INS Align Data
SELECTED
AAR Probe
AS DESIRED
Refill Utilities
AS REQUIRED
Inlet Cover and Ladder
DESELECT
ENGINE START
Fuel Pump Switch
START PUMP
Engine Control Switch
ENG CTRL
1
4
ENGINE START
Throttle Uncage
IDLE
Engine Ground Start Button
HOLD UNTIL ENGINE SPOOLS
Engine Mode Switch
AS DESIRED
POST-ENGINE START
Radio Mode Selector
TR+G
Emergency Hydraulic Pump Switch
EMG HYD
SHARS Switch
SHARS
INS Mode Knob
INS NAV
Center MFCD R5
ENTER CURRENT HEADING
The current heading can be found in the kneeboard and is entered on the center MFCD.
DTC
After the jet has finished aligning, select the desired loadout.
While rearming, create flight plan via F10 map markers, or use what is already in the jet.
Ground Crew > Update DTC Data > Update Data
DTC Data Card
INSERT
Left click twice to insert
Left MFCD U5 (ALL)
PRESS
Left MFCD R5 (ENT)
PRESS & WAIT FOR LOAD
STARTUP CONTINUED
Canopy
CLOSED
Interior and Exterior Lights
AS DESIRED
AA/AG Switch
AS REQUIRED BY LOADOUT
2
4
STARTUP CONTINUED
AG1/AG2 Switch
AS REQUIRED BY LOADOUT
A CONFIG warning light is displayed if either of these switches are in the wrong position.
COM1 Volume Knob
AS DESIRED
COM2 Volume Knob
AS DESIRED
Intercom Switch
INT COM
MSL Volume Knob
AS DESIRED
TCN/ILS Volume Knob
AS DESIRED
T1_Center: Nav Mode Keybind
PRESS
Digital Clock Switch
ON
BARO Altitude Setting Knob
AS DESIRED
GPS & IFF
UFCP HNS Button
PRESS
UFCP L2 Button (INS)
PRESS
UFCP Button IFF/8
PRESS
UFCP Button R3 (M6-)
PRESS
UFCP Button R1 (*)
PRESS
UFCP Button R3 (M6-)
PRESS
UFCP Button R4 (CODE)
PRESS
UFCP Button R3 (IP-)
PRESS
UFCP Button RTN
PRESS
3
4
DATALINK
UFCP Button R4 (001)
PRESS TWICE
UFCP Number Buttons
199
UFCP Button R4 (199)
PRESS
UFCP Button R3 (SLAV)
PRESS
UFCP Button L3 (NE-)
PRESS
UFCP Button RTN
PRESS
OXYGEN & G-SUIT
G-SUIT Connector
CLICK
Oxygen Tube Connector
CLICK
Oxygen Supply Valve
ROTATE FULLY ANTICLOCKWISE
Eject Seat firing Handle Safety Pin
REMOVE
Eject Seat Safe/Arm Handle
ARMED
PRE-TAXI
Trailing Edge Flaps (TEF) Switch
DOWN
Parking Brake Switch
NORM
4
4